Applications 96
Adaptation
If Nuance frequently does not recognize your commands, adapting digit dialing to your voice improves the accuracy
of digit recognition.
After you adapt Digit Dial, your phone recognizes only your voice. Other users are not able to use the handset with
Nuance unless the handset is reset to factory defaults.
Adapting requires recording multiple sequences of digits. The entire adaptation process takes approximately one
minute.
1.
In Idle mode, touch
Menu
➔
Applications
➔
Voice recognition
.
After a brief pause, a list of available commands displays on the screen along with the “
Say a command
”
message.
2.
From the “
Say a command
” screen, touch
Settings
➔
Adaptation
.
3.
Touch
Adapt Voice
.
4.
The screen displays an adaptation message. The entire adaptation process takes just a couple of minutes to
complete.
Tip:
Perform the adapation process in a quiet room.
5.
Touch
Start
to being adapation or touch
Back
to cancel.
Modes
Your voice recognition software includes an interface that allows you to customize your voice command, mode
setting to match your experience and comfort level with voice commands. You can select one of three levels,
Expert mode, Prompt mode, or Readout mode.
Voice recognition provides a three modes or settings, Expert mode, Prompt mode and Readout mode. Using Modes,
you can select your user level.
1.
In Idle mode, touch
Menu
➔
Applications
➔
Voice recognition
.
After a brief pause, a list of available commands displays on the screen along with the “
Say a command
”
message.
T919 Roxy.book Page 96 Thursday, September 25, 2008 5:01 PM