Setting address of the ERV and installation option
Installation/service mode of wired remote controller
Additional functions of ERV wired remote controller
SEG used
Main menu
Exit
Set, Cancel
Up and down
Sub menu
1 2
left
Right
1 . If you want to use the various additional functions for your wired remote controller, press the
[Mode]
and
[ ]
buttons at
the same time for more than three seconds .
- You will enter the additional function settings, and the main menu will be displayed .
2 . Refer to the list of additional functions for your ERV wired remote controller on the next page, and select the desired
menu .
- Using the
[ ]/[ ]
buttons, select a main menu number and press the
[Away]
button to enter the sub-menu setting
screen .
- Using the [
]/[
] buttons, select a sub-menu number and press the
[Away]
button to enter data setting screen .
- When you enter the setting stage, the current setting will be displayed .
- Refer to the chart for data settings .
- Using the [
]/
[ ]
buttons, select the settings . Press the
[Away]
button to move to the next setting .
- Press the
[Set]
button to save the settings and exit to the sub-menu setting screen .
- Press the
[timer]
button to exit to normal mode .
•
While setting the data, press the
[Mode]/[Away]
button to move the digit of SEG .
•
If you press the
[timer]
button while your are setting data, you can exit to the sub-menu setting stage without
saving your changes .
NotE
ENGLISH-38
ERV_IM_EN_DB68-05252A-02.indd 38
2016-05-27 오전 11:26:54
