Tools 100
2.
Press the
OK
soft key or
press
.
Your phone displays
the first digit sequence and “
Please say
” plays through the
speaker followed by the four digits appearing in the
display.
3.
Wait for the beep and say the digits using your normal tone
of voice. After a moment, the phone plays back the
recording and prompts “
Did the recording sound ok?
”
•
If the recording was good, say “
Yes
.”
•
If you need to re-record, say “
No
.”
If you say “No,” the phone prompts you to pronounce the
digits again. Wait for the beep and then say the digits.
Repeat this step until you’re satisfied with the recording.
4.
After confirming that the recording sounds “ok”, continue
the recording process with the next set of digits.
5.
After 10 sets of digits, the phone asks whether you want to
do more adaptation. Answer “
Yes
.”
6.
Repeat steps 4 and 5 for another 10 sets of digits. After the
second group of 10 sets of digits, “
Adaptation complete
”
plays through the speaker and you are returned to the
Digit
Dialing
menu.
Reset Digits
To reset digit dialing to factory default settings, do the following:
1.
From the
Tools
menu, select
Voice Service
➔
Voice Settings
➔
Digit Dialing
➔
Reset Digits
. The phone prompts you to
confirm digit reset.
2.
Press the
OK
soft key or
press
to reset your digit
adaptation, or press the
Back
soft key or press
to
cancel.
Sound
Sound lets you specify what (if any) text prompts you want your
phone to read to you through the earpiece.
1.
From the
Tools
menu, select
Voice Service
➔
Voice Settings
➔
Sound
. The following options appear in the display:
• Prompts
— On/Off — Enables or disables audio prompts.
• Digits
— On/Off — Enables or disables digit playback.
• Names
— On/Off — Enables or disables name playback.
• Name Settings
— Lets you adjust the
Speed
(Faster or Slower)
and
Volume
(Louder or Softer) of your phone’s audio name
playback.
2.
Select the desired option.
3.
Highlight the desired setting.
