ENGLISH-15
02
INS
ta
LL
at
ION
Connecting drain hose
1 . Slightly hit the hole, for drain hose, with your hands or hammer .
2 . Insulate the drain hose with drain insulation tube and fix it with tape .
3 . Direct the drain hose downward to establish natural draining .
- Make sure to check for proper drainage after connection
• Fix the drain hose tightly to prevent any water leakage .
• Do not use the extended drain hose .
- Since water may leak from the connection part, make sure that you do not extend the drain hose . However, if
extension is unavoidable due to its short length, use silicone sealant to securely seal the connection to prevent
leakage . (Do not use the insulation tape .)
CaUtION
Duct drainage
[Polypropylene(PP)]
Drain hose
Insulation (foamed
polyethylene)
Connection drain
hose
• Connect the drain hose through the upper hole for
drain hose .
Upper hole for a drain hose
Piping
Drain hose
410 mm
Hole for piping connection
• Connection with wire-concealed piping
Upper hole for a drain hose
Piping
Hole for piping connection
Drain hose
Incorrect installation
(U-TRAP)
• Make sure the U-TRAP does not occur . Water may overflow and cause property damage .
CaUtION
FAC MEMORY-EU_IM_04036A-03_EN.indd 15
2016-03-30 오전 10:58:26
