Samsung AC100RN4PKG Скачать руководство пользователя страница 25

Страница: 25 / 38

Ins
tallation Pr

oc
edur

English

Check whether the option values that you have set are
correct by pressing the

(Mode) button repeatedly

[SEG2, SEG3]

[SEG11, SEG12]

[SEG21, SEG22]

[SEG4, SEG5]

[SEG14, SEG15]

[SEG23, SEG24]

[SEG6, SEG8]

[SEG16, SEG17]

[SEG9, SEG10]

[SEG18, SEG20]

Save the option values into the indoor unit:

Point the remote control to the remote control sensor
on the indoor unit and then press the

(Power)

button on the remote control twice. Make sure that
this command is received by the indoor unit. When it
is successfully received, you can hear a short sound
from the indoor unit. If the command is not received,
press the

(Power) button again.

Check whether the air conditioner operates in
accordance with the option values you have set:

Reset the indoor or outdoor unit.

Indoor unit : Press the

(Set) and

(Option)

buttons on the remote control simultaneously for
4 seconds.

Outdoor unit : Press the K3 button.

Remove the batteries from the remote control,
insert them again, and then press the

(Power)

button on the remote control.

Remote controls

Low Temp button

High Temp button

Mode button

Low Fan button

High Fan button

Setting the

option values

Entering the

mode for setting

the options

NOTE

The remote control display and buttons may vary
depending on the model.

Enter the mode for setting the options:

Remove the batteries from the remote control,
and then insert them again.

While holding down the

(High Temp) and

(Low Temp) buttons simultaneously, insert the
batteries into the remote control.

Make sure that you are entered to the mode for
setting the options:

Steps

Remote control display

Set the SEG24 value by rotating the Wheel clockwise
until the value you want to set appears on the remote
control display.

SEG24

When you rotate the Wheel, values appear in the following order:

Содержание AC100RN4PKG







































Результаты поиска

Содержание AC100RN4PKG

Отзывы:

Samsung AC100RN4PKG, Руководство по установке, Страница: 25 / 38

Результаты поиска

Содержание AC100RN4PKG

Отзывы: