Samsung AC RNJDKG Series, Руководство по установке

Страница: 22 / 28

22
Installation Procedure
Ins
tallation Pr
oc
edur
e
English
Setting the indoor unit addresses
1 Make sure that the power is supplied to the indoor unit. If the indoor unit is not plugged in, it must include a power
supply.
2 The panel(display ) should be connected to an indoor unit to receive option.
3 Before installing the indoor unit, assign an address to the indoor unit according to the air conditioning system plan.
4 Assign an indoor unit address by wireless remote controller.
– The initial indoor unit ADDRESS is set as "MAIN : 0, RMC : 0".
– Set Main and RMC Address only the setting is required.
– There is no need to assign the indoor unit Main Address if the outdoor unit is addressing automatically.
The indoor unit Main address will follow the outdoor unit's automatically.
– Assign 12 digit when setting the indoor unit address.
– No need to assign SEG4, 5, 8, 10 which are non applicable. Even though those segments are set, they will be
ignored.
– If you set the applicable segments with numbers other than the indiciated, the initial setting will be maintained.
Option No. : 0AXXXX-1XXXXX-2XXXXX-3XXXXX
Option SEG1 SEG2 SEG3 SEG4 SEG5 SEG6
Explanation PAGE MODE
Setting Main
address
RESERVED RESERVED
The unit digit of
an indoor unit
Indication
and
Details
Indication Details Indication Details Indication Details Indication Details
0 A
0
No Main
address
0~3(ACN*)
A single
digit
1
Main
address
setting
mode
0~4
(AJN*)
Option SEG7 SEG8 SEG9 SEG10 SEG11 SEG12
Explanation PAGE
RESERVED
Setting RMC
address
RESERVED
Group
channel(*16)
Group address
Indication
and
Details
Indication Details Indication Details Indication Details Indication Details
1
0
No RMC
address
RMC1 0~2 RMC2 0~F
1
RMC
address
setting
mode
*SEG6: AJN** models should check maximum installation indoor unit number of outdoor unit.
(Indoor1: 0, Indoor2: 1, ~)