Samsung 2 COLOR THERMAL PRINTER SRP-370, Руководство пользователя

Страница: 37 / 45

72
<Function 2>
GS ( M pL pH fn m (fn=2, 50)
[Format]
[Range]
[Description]
ASCII GS ( M pL pH fn m
Hex 1D 28 4D pL pH fn m
Decimal 29 40 77 pL pH fn m
(pL + pH x 256) = 2 (pL=2, pH=0)
fn=2, 50
m=0, 1, 48, 49
▪ When (m=0,48), initializes all settings in the active area, as described in
these specifications.
▪ When (m=1,49), copies the setting stored in the mth storage area to the
active area. If no data in the storage area is protected, all settings in the
active area are initialized as described in these specifications.
<Function 3> GS ( M pL pH fn m (fn=3, 51)
[Format]
[Range]
[Description]
ASCII GS ( M pL pH fn m
Hex 1D 28 4D pL pH fn m
Decimal 29 40 77 pL pH fn m
(pL + pH x 256) = 2 (pL=2, pH=0)
fn=3, 51
m=0, 1, 48, 49
▪ When m=0,48, does not load data in the storage area to the active area
upon initialization.
▪ When m=1,49, loads data in the storage area to the active area upon
initialization.
GS ( N pL pH fn [parameter]
[Name]
[Description]
Select character style.
▪ Executes commands for the character style as specified by the function
code fn.
fn Format Function No. Description
48 GS ( N pL pH fn m Function 48 Selects character color.
<Function 48> GS ( N pL pH fn m (fn=48)
[Format]
[Range]
[Default]
[Description]
ASCII GS ( N pL pH fn m
Hex 1D 28 4E pL pH fn m
Decimal 29 40 78 pL pH fn m
(pL + pH x 256) = 2 (pL=2, pH=0)
fn=48
m=49 (when the monochrome paper is selected)
m=49,50 (when the two-color paper is selected)
m=49
▪ Prints characters in the color specified by m.
m Color
49 Color 1
50 Color 2
- Color 1 means black (high level of energy) in the specified two-color
thermal paper.
- Color 2 means red (low level of energy) in the specified two-color
thermal paper.
73
GS * x y [d1...d(x x y x 8)]
[Name]
[Format]
[Range]
[Description]
Define downloaded bit image.
ASCII GS * x y [d1...d(x x y x 8)]
Hex 1D 2A x y [d1...d(x x y x 8)]
Decimal 29 42 x y [d1...d(x x y x 8)]
1 ≤ x ≤ 255
1 ≤ y ≤ 48 (where x x y ≤ 1536)
0 ≤ d ≤ 255
▪ Defines the downloaded bit image using the number of dots specified by x
and y.
- x specifies the number of dots in the horizontal direction.
- y specifies the number of dots in the vertical direction.
▪ When the memory switch 8-7 is On, the user-defined character and the
downloaded bit image cannot be defined simultaneously. The downloaded
bit image data is cleared with this command.
GS / m
[Name]
[Format]
[Range]
[Description]
Print downloaded bit image.
ASCII GS / m
Hex 1D 2F m
Decimal 29 47 m
0 ≤ m ≤ 3, 48 ≤ m ≤ 51
▪ Prints the defined downloaded bit image in m mode.
- For SRP-370
m Mode Vertical dot density Horizontal dot density
0, 48 Normal 180 dpi 180 dpi
1, 49 Double-width 180 dpi 90 dpi
2, 50 Double-height 90 dpi 180 dpi
3, 51 Quadruple 90 dpi 90 dpi
- For SRP-372
m Mode Vertical dot density Horizontal dot density
0, 48 Normal 203 dpi 203 dpi
1, 49 Double-width 203 dpi 203/2 dpi
2, 50 Double-height 203/2 dpi 203 dpi
3, 51 Quadruple 203/2 dpi 203/2 dpi
dpi : dots per 25.4mm {1"}
GS :
[Name]
[Format]
[Description]
Start/end macro definition.
ASCII GS :
Hex 1D 3A
Decimal 29 58
▪ Starts or ends macro definition.
- The contents of the macro can be defined up to 2048 bytes.