Samsung 2 COLOR THERMAL PRINTER SRP-370, Руководство пользователя

Страница: 8 / 45

14
Print Density
Parallel/USB Interface Specification
Switch No. Function ON OFF Default
SW2-1 OFF
SW2-2 OFF
SW2-3
Select Print Density Refer to below Table
OFF
SW2-4 Historical Control Enable Disable OFF
SW2-5 Reserved -- OFF
SW2-6
Interface Condition
Selection
by Memory
Switch
by DIP
Switch
OFF
SW2-7 Reserved -- OFF
SW2-8 Printing width 2” Printing 3” Printing OFF
Print Density
SW
2-1
SW
2-2
SW
2-3
Print Density Remark
ON ON ON 130%
OFF ON ON 120%
ON OFF ON 110%
OFF OFF ON 105%
OFF OFF OFF 100% Default
ON OFF OFF 95%
OFF ON OFF 90%
ON ON OFF 80%
SW
2-1
SW
2-2
SW
2-3
Print Density Remark
ON ON ON 130%
OFF ON ON 120%
ON OFF ON 110%
OFF OFF ON 105%
ON OFF OFF 100% Default
OFF OFF OFF 95%
OFF ON OFF 90%
ON ON OFF 80%
Dip Switch Set 1
SW 5 ON Auto Cutter Disabled
Application Ignores Auto Cutter error for continuous printing.
※
Auto Cutter Enable / Disable selection
15
1-10. Setting the Memory Switches
This printer has “Memory Switch” set which is software switches. Memory Switch set has
“MSW1”, “MSW2”, “MSW8”, “MSW9” “Customize value”, “Serial communication condition”.
“Memory Switch setting utility” can change the Memory Switch set to ON or OFF as shown
in the table below (default : all OFF) :
Settings of the Memory Switch are stored in the NV memory : therefore, even if the printer
is turned off, the settings are maintained.
MSW1
Switch Function ON OFF
1~4 Reserved -- Fixed to OFF
5 Auto Line Feed Enable Disable
6~8 Reserved -- Fixed to OFF
MSW2
Switch Function ON OFF
1~2 Reserved -- Fixed to OFF
3 Auto Cutter Function Full Cutting Partial Cutting
4~8 Code Page Selection Refer to following Table
Notes : The Memory Switch is available to be changed by three methods :
- Memory Switch setting utility.
- Control from ESC/POS command.