Samsung 2 COLOR THERMAL PRINTER SRP-370, Руководство пользователя

Страница: 27 / 45

52
[Description]
▪ For SRP-372 :
- When a paper width of 80mm{3.15"} is selected :
(xL + xH x 256) = 0 (xL=0, xH=0)
(yL + yH x 256) = 0 (yL=0, yH=0)
(dxL + dxH x 256) = 576 (dxL=64, dxH=2)
(dyL + dyH x 256) = 1476 (dyL=196, dyH=5)
- When a paper width of 60mm{2.36"} is selected :
(xL + xH x 256) = 0 (xL=0, xH=0)
(yL + yH x 256) = 0 (yL=0, yH=0)
(dxL + dxH x 256) = 380 (dxL=128, dxH=1)
(dyL + dyH x 256) = 1476 (dyL=196, dyH=5)
▪ Set the position and the size of the printing area.
- Horizontal starting position = [(xL + xH x 256) x (horizontal motion unites)].
- Vertical starting position = [(yL + yH x 256) x (vertical motion unites)].
- Horizontal printing area width = [(dxL + dxH x 256) x (horizontal motion unites)].
- Vertical printing area width = [(dyL + dyH x 256) x (vertical motion unites)].
▪ The maximum printable area is 117.263mm {1662/360"} maximum.
ESC
＼
nL nH
[Name]
[Format]
[Range]
[Description]
Set relative print position.
ASCII ESC
＼
nL nH
Hex 1B 5C nL nH
Decimal 27 92 nL nH
0 ≤ (nL + nH x 256) ≤ 65535 (0 ≤ nL 255, 0 ≤ nH ≤ 255)
▪ Set the print starting position based on the current position to [(nL + nH
× 256) × horizontal or vertical motion unit]
- When (nL + nH × 256) is positive number, the print starting position is
specified to the right based on the current position.
- When (nL + nH × 256) is negative number, the print starting position is
specified to the left based on the current position.
ESC a n
[Name]
[Format]
[Range]
[Default]
[Description]
Select justification.
ASCII ESC a n
Hex 1B 61 n
Decimal 27 97 n
0 ≤ n ≤ 2, 48 ≤ n ≤ 50
n=0
▪ In standard mode, aligns all the data in one line to the position specified by n as follows :
n Justification
0, 48 Left justification
1, 49 Centering
2, 50 Right justification
53
ESC c 3 n
[Name]
[Format]
[Range]
[Default]
[Description]
Select paper sensor(s) to output paper end signals.
ASCII ESC c 3 n
Hex 1B 63 33 n
Decimal 27 99 51 n
0 ≤ n ≤ 255
n=0
▪ Selects the paper sensor(s) to output paper end signals when a paper end
is detected.
Bit Off/On Hex Decimal Function
Off 00 0 Paper roll near-end sensor disable. 0
On 01 1 Paper roll near-end sensor enable.
Off 00 0 Paper roll near-end sensor disable. 1
On 02 2 Paper roll near-end sensor enable.
Off 00 0 Paper roll end sensor disable. 2
On 04 4 Paper roll end sensor enable.
Off 00 0 Paper roll end sensor disable. 3
On 08 8 Paper roll end sensor enable.
4~7 - - - Reserved.
[Note] ▪ This command is available only with a parallel interface and is ignored
with a serial interface.
ESC c 4 n
[Name]
[Format]
[Range]
[Default]
[Description]
Select paper sensor(s) to stop printing.
ASCII ESC c 4 n
Hex 1B 63 34 n
Decimal 27 99 52 n
0 ≤ n ≤ 255
n=0
▪ Selects the paper sensor(s) to use to stop printing when a paper end is
detected.
Bit Off/On Hex Decimal Function
Off 00 0 Paper roll end sensor disable. 0
On 01 1 Paper roll end sensor enable.
Off 00 0 Paper roll end sensor disable. 1
On 02 2 Paper roll end sensor enable.
2~7 - - - Reserved.