Samsung 2 COLOR THERMAL PRINTER SRP-370 Скачать руководство пользователя

Страница: 1 / 45

USER’S MANUAL

SRP-370/372

THERMAL RECEIPT PRINTER

All specifications are subjected to change without notice

http://www.samsungminiprinters.com

Safety Precautions

In using the present appliance, please keep the following safety

regulations in order to prevent any hazard or material damage.

Violating following instructions can cause serious injury or death.

Do not plug several products in one

multi-outlet.

This can provoke over-heating and a fire.
If the plug is wet or dirty, dry or wipe it

before usage.

If the plug does not fit perfectly with the

outlet, do not plug in.

Be sure to use only standardized

multi-outlets.

You must use only the supplied adapter.

It is dangerous to use other adapters.

Do not pull the cable to unplug.

This can damage the cable, which is the

origin of a fire or a breakdown of the printer.

Keep the plastic bag out of children’s reach.

If not, a child may put the bag on his head.

Do not plug in or unplug with your hands

wet.

You can be electrocuted.

Do not bend the cable by force or leave it

under any heavy object.

A damaged cable can cause a fire.

If you observe a strange smoke, odor or

noise from the printer, unplug it before

taking following measures.

Switch off the printer and unplug the set

from the mains.

After the disappearance of the smoke, call

your dealer to repair it.

WARNING

PROHIBITED

ONLY SUPPLIED ADAPTER

PROHIBITED

TO UNPLUG

PRINTER

Содержание 2 COLOR THERMAL PRINTER SRP-370














































Результаты поиска

Содержание 2 COLOR THERMAL PRINTER SRP-370

Отзывы:

Похожие инструкции для 2 COLOR THERMAL PRINTER SRP-370

Бренды по названию

Популярные бренды

Samsung 2 COLOR THERMAL PRINTER SRP-370, Руководство пользователя

Результаты поиска

Содержание 2 COLOR THERMAL PRINTER SRP-370

Отзывы:

Похожие инструкции для 2 COLOR THERMAL PRINTER SRP-370

Бренды по названию

Популярные бренды