G
etting Started
2 - English
Warning
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE THE COVER(OR BACK).
NO USER-SERVICEABLE PARTS ARE INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
This symbol indicates “dangerous voltage”
inside the product that presents a risk of
electric shock or personal injury.
This symbol indicates important instructions
accompanying the product.
Do not install this equipment in a confined space such
as a bookcase or similar unit.
WARNING
To prevent damage which may result in fire or electric
shock hazard, do not expose this appliance to rain or
moisture.
Note to CATV system installer
This reminder is provided to call CATV system installer’s
attention to Article 820-40 of the National Electrical Code
(Section 54 of Canadian Electrical Code, Part I) that
provides guidelines for proper grounding and, in
particular, specifies that the cable ground shall be
connected to the grounding system of the building as
close to the point of cable entry as practical.
FCC NOTE (for U.S.A):
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
Part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful
interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio or
television reception, which can be determined by
turning the equipment off and on.
The user is encouraged to try to correct the interference
by one or more of the following measures.
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment
and receiver.
• Connect this equipment into an outlet on a circuit
different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV
technician for help.
This class B digital apparatus meets all
requirements of the Canadian Interference --
Causing Equipment Regulations.
CAUTION
THIS PRODUCT UTILIZES A LASER. USE OF
CONTROLS OR ADJUSTMENTS OR
PERFORMANCE OF PROCEDURES OTHER THAN
THOSE SPECIFIED HEREIN MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE. DO NOT
OPEN COVER AND DO NOT REPAIR YOURSELF.
REFER SERVICING TO QUALIFIED PERSONNEL.
Note:
• This unit can be used only where the power supply is
AC 120V, 60Hz. It cannot be used elsewhere.
• This Blu-ray disc player is designed and manufactured
to respond to the Region Management Information.
If the Region number of a BD/DVD disc does not
correspond to the Region number of this Blu-ray disc
player, the Blu-ray disc player cannot play the disc.
• The product unit accompanying this user manual is
licensed under certain intellectual property rights of
certain third parties. In particular, this product is
licensed under the following US patents: 5,991,715,
5,740,317, 4,972,484, 5,214,678, 5,323,396,
5,539,829, 5,606,618, 5,530,655, 5,777,992,
6,289,308, 5,610,985, 5,481,643, 5,544,247,
5,960,037, 6,023,490, 5,878,080, and under US
Published Patent Application No. 2001-44713-A1.
This license is limited to private non-commercial use
by end-user consumers for licensed contents.
No rights are granted for commercial use. The license
does not cover any product unit other than this
product unit and the license does not extend to any
unlicensed product unit or process conforming to
ISO/IEC 11172-3 or ISO/IEC 13818-3 used or sold in
combination with this product unit.
The license only covers the use of this product unit to
encode and/or decode audio files conforming to the
ISO/IEC 11172-3 or ISO/IEC 13818-3. No rights are
granted under this license for product features or
functions that do not conform to the ISO/IEC 11172-3
or ISO/IEC 13818-3.
CLASS 1
LASER PRODUCT
KLASSE 1
LASER PRODUKT
LUOKAN 1
LASER LAITE
KLASS 1 LASER APPARAT
PRODUCTO LÁSER CLASE 1
P1200_XAC_ENG_1~36 3/7/70 11:13 AM Page 2
