Samson TROVIS 6495 Series, Монтаж и эксплуатация

Страница: 30 / 156

The menu
M Control mode
is
highlighted.
9.2 Configuring the controller
The controller is configured by setting the
configuration items and associated parame-
ters.
Each configuration item has its own code,
which gives information on its position in the
configuration level.
Example: The configuration item
Input
signal
has the code
I.1.1.
4
I
→
Menu
I Input
4
I.1
→
Submenu 1
Analog
input AI1
4
I.1.1
→
Configuration item 1
Input signal
with the setting
-6
Pt 100
For control modes with two controllers
, the
controller number “
1C
…“ (Controller [1])
and “2C…“ (Controller [2]) is added to dis-
tinguish between the controllers, e.g. for
configuration item
C.1.1.1 Input vari-
able PV
:
Note: Some configuration items as well as
the parameters can only be set if certain set-
tings have already been made in the con-
troller configuration. The required settings
for the controller configuration are de-
scribed in the configuration list (section
15.2) and in the Configuration Manual
KH 6495-2 EN.
9.2.1 Setting configuration items
1. Read the code of the configuration item
that you want to change from the con-
figuration list (section 15.2).
2. Find the position in the configuration
level. See the example in section 9.2.2.
Select and set the configuration item
… If the configuration item that you
want to set is not in the menu
M Control mode
, select the menu
required:
I Input
C Controller [1]/[2]
O Output
D Communication
A General settings
30
EB 6495-2 EN
Configuration menu