Samson TROVIS 3730-3, Монтаж и эксплуатация

Страница: 134 / 180

134 EB 8384-3 EN
Appendix
Code
no.
Parameter – Readings/
values [default setting]
Description
32* Error message in case of
'Function check'
condensed state
[YES], No, ESC
YES: Error message also in case of 'Function check' condensed
state
No: 'Function check' condensed state does not cause an error
message to be issued
Regardless of the condensed state, the fault alarm output always
switches when the error codes 57, 58, 60, 62 and 64 to 70, 76 are
issued.
33* Error message in case of
condensed state
'Maintenance required'
[YES], No, ESC
YES: Error message only in case of condensed state
'Maintenance alarm' and 'Maintenance required'
No: Error message only in case of condensed state
'Maintenance alarm'
Regardless of the condensed state, the fault alarm output always
switches when the error codes 57, 58, 60, 62 and 64 to 70, 76 are
issued.
34* Closing direction
CL, [CCL], ESC
CL: Clockwise
CCL: Counterclockwise
Direction of rotation to reach the valve's CLOSED position (view onto
rotary switch with positioner cover open).
Needs only be entered in SUb initialization mode (Code 6).
35* Blocking position
[0.0] mm/° /%, ESC
Enter the blocking position (distance to CLOSED position)
Only necessary with SUb initialization mode.
36* Reset
[No], Std, diAG, ESC
Std: Resets all parameters and diagnosis data to their default
settings. After a reset, the positioner must be re-initialized.
diAG: Resets diagnosis data only. Plotted reference graphs and
logs remain saved.
The positioner does not need to be re-initialized.
37* Position transmitter
No, YES
Read only
Indicates whether an optional position transmitter is installed.
38* Inductive alarm
[No], YES, ESC
Indicates whether the inductive limit switch option is installed or not.