Samson TROVIS 3730-3, Монтаж и эксплуатация

Страница: 107 / 180

EB 8384-3 EN 107
Operating the positioner
By entering the blocking position (Code 35), closing direction (Code 34), pin position (Code
4), nominal range (Code 5) and direction of action (Code 7), the positioner can calculate the
positioner configuration.
Perform a reset before re-initializing the positioner if the substitute positioner has already
been initialized. Refer to section 7.9.
Enable configuration:
If no settings are entered within 120 seconds, the enabled configuration function becomes in -
valid.
1. Turn until Code 3 appears (reading:
No ).
2. Press , the code number 3 blinks.
3. Turn until
YES appears.
4. Press to confirm (reading: ).
Enable configuration
Default: No
Enter the pin position and nominal range:
1. Turn until Code 4 appears.
2. Press , the code number 4 blinks.
3. Turn to select pin position on lever (see
relevant section on attachment).
4. Press to confirm.
5. Turn until Code 5 appears.
6. Press , the code number 5 blinks.
7. Turn and set nominal travel of the valve.
8. Press
to confirm.
mm
Pin position
Default: No
mm
Nominal range
(locked when Code 4 =
No)
NOTICE !