Samson TROVIS 3730-3, Монтаж и эксплуатация

Страница: 114 / 180

114 EB 8384-3 EN
Operating the positioner
7.9 Reset to default settings
This function resets all start-up and setting parameters as well as the diagnosis to the factory
default settings (see code list in section 11.4).
Enable configuration:
If no settings are entered within 120 seconds, the enabled configuration function becomes in -
valid.
1. Turn until Code 3 appears (reading:
No ).
2. Press , the code number 3 blinks.
3. Turn until
YES appears.
4. Press to confirm (reading: ).
Enable configuration
Default: No
Reset start-up parameters:
1. Turn until Code 36 appears (reading:
••–••–).
2. Press , the code number 36 blinks.
3. Turn until
Std appears.
4. Press to confirm. All start-up parameters
as well as the diagnosis are reset to their
default values.
Reset
Default: No
Code 36 - diAG allows just the diagnosis data (EXPERTplus) to be reset. Refer to the Operat-
ing Instructions for EXPERTplus valve diagnostics
u
EB 8389.
Note