Samson TROVIS 3730-1, Монтаж и эксплуатация

Страница: 58 / 80

58 EB 8384-1 EN
Code list
Error codes
E7 Actuator does not move No supply air, mounting blocked.
No input signal or input signal below 3.7 mA
Recommended action Check supply air, positioner mounting and mA input signal.
Re-initialize the positioner.
E8 Travel signal at lower/
upper limit
Wrong pin position, wrong lever, wrong attachment direction when
NAMUR attachment is used.
Recommended action Check positioner mounting and re-initialize the positioner.
E9 Internal error Switch off positioner and wait ten seconds before switching it on
again. If the error reappears, return positioner to SAMSON AG
for repair.
E10
to
E13
Device error (internal) Return positioner to SAMSON AG for repair.
E14 Data error Reset positioner (P18). Reconfigure and re-initialize the positioner.
If the error reappears, return positioner to SAMSON AG for re-
pair.
E15 Device error (internal) Return positioner to SAMSON AG for repair.