Samson TROVIS 3730-1, Монтаж и эксплуатация

Страница: 31 / 80

EB 8384-1 EN 31
Attachment to the control valve – Mounting parts and accessories
5. Mount connecting plate (6) or pressure
gauge bracket (7) with pressure gauges
on the positioner, making sure the two
seals are seated properly. Double-acting
springless rotary actuators require the
use of a reversing amplifier on the con-
nection side of the positioner housing
(see section 4.6).
6. Unscrew the standard follower pin (2)
from the positioner's
M lever (1). Use the
metal follower pin (Ø 5 mm) included in
the mounting kit and screw tight into the
hole for pin position
90° .
7. Place positioner on the top bracket (10)
and fasten tight. Taking the actuator's di-
rection of rotation into account, adjust le-
ver (1) so that it engages in the slot of the
coupling wheel (4) with its follower pin
(Fig. 11). It must be guaranteed that the
lever (1) is parallel to the long side of the
positioner when the actuator is at half its
angle of rotation.
8. Stick the scale plate (4.3) on the coupling
wheel so that the arrow tip indicates the
closed position and it can be easily read
when the valve is installed.
1.2
1.1
1
2
4.1
4.2
5
3
Fig. 10: Mounting the coupling wheel on
Type 3278
10
10.1
6
(7, 8)
1.1
2
4.3
5
6.1
4
1.2
1
130 mm
80 mm
NOTICE
Only use the connecting
plate (6) included in the
accessories to connect
supply and output.
Never screw threaded parts
directly into housing.
Legend for Fig. 10 and
Fig. 11
1 Lever
1.1 Nut
1.2 Disk spring
2 Follower pin
3 Follower clamp (Fig. 10)
4 Coupling wheel
4.1 Screw
4.2 Disk spring
4.3 Scale plate
5 Actuator shaft
Adapter for Type 3278
6 Connecting plate
6.1 Seals
7 Pressure gauge bracket
8 Pressure gauge mount-
ing kit
10 Top pair of brackets
10.1 Bottom pair of brackets
Control valve opens counterclockwise
Control valve opens clockwise
Slot
Slot
Fig. 11: Attachment to rotary actuators