![background image](http://html2.mh-extra.com/html/samson/media-6/media-6_original-instructions-manual_3792312034.webp)
34
EB 9527-2 EN
User interface
3.3 Settings at the Media 6 device
3.3.1 Testing the limit switches and current output
Menu bar
[Device]
Test functions
Test the functioning of the limit switches if they are connected with an isolating switch amplifi
-
er.
The current output can be set to a defined test value. During the test, the display of the Me
-
dia 6 device is switched off.
[Transmit]
The test is performed.
3.3.2 Zero and span calibration
Menu bar
[Device]
[Calibration]
Zero and span calibration
[Run]
Zero and span are calibrated.
Note:
To be able to perform the calibration in the TROVIS-VIEW 4 software, refer to
u
EB 9527-3 for the test setup of the Media 6 device and the enabling of the write
and span protection.
3.3.3 Zero point setting through basic calibration
After changing the range springs or diaphragm, the Media 6 device must be recalibrated. In
this case, an update of TROVIS-VIEW 4 with the "Z-Adj.tro" file is required.
Note:
Basic calibration must only be performed after consulting SAMSON since special
knowledge is required in this case.
Содержание Media 6
