Samson EB 8061 EN Скачать руководство пользователя страница 72

Страница: 72 / 92

9-14

EB 8061 EN

Servicing

Insert the wire of the red spacer ring

(15.1) into the groove of the retaining

ring.

Slide the retaining ring over the plug

stem.

4. Insert the red spacer ring (15.1) between

the threaded bushing (8) and retaining
ring. See Fig. 9-3.

5. Proceed as described in ‘Standard pack-

ing (PTFE)’, steps 13 to 16.

9.4.4 Replacing the seat and

plug

Risk of control valve damage due to incor-

rect servicing.

Seat and plug can only be replaced
when all the following conditions are

met:

− The valve size is ≤NPS 4.

− The valve does not have a balanced

plug.

− The valve does not have a bellows

seal.

− The valve does not have a flow

divider.

− The valve does not have an AC trim.

− The standard or ADSEAL packing is

installed in the valve.

To replace seat and plug in other valve
versions, contact our after-sales service.

Risk of damage to the facing of the seat

and plug due to incorrect servicing.

Always replace both the seat and plug.

When replacing the seat and plug, we also
recommend replacing the packing (see sec-
tion 9.4.3).

a) Standard version

1. Unscrew the castellated nut (92) and lift

the yoke (3) off the bonnet (2).

2. Undo the top body nuts (14) gradually in

a crisscross pattern.

3. Lift the bonnet (2) and plug with plug

stem (5) off the body (1).

4. Replace the top gasket as described in

section 9.4.1.

Unscrew the stem connector nut (9) and

lock nut (10) from the plug stem.

6. Unscrew the threaded bushing (8).
7. Pull the plug with plug stem (5) out of the

bonnet (2).

8. Pull the entire packing out of the packing

chamber using a suitable tool.

Make sure that the top guide bushing (7)
is not damaged. If necessary, replace the
guide bushing using a suitable tool.

10. Unscrew the seat (4) using a suitable

tool.

NOTICE

Tip

Содержание EB 8061 EN





























































































Результаты поиска

Содержание EB 8061 EN

Отзывы:

Похожие инструкции для EB 8061 EN

Бренды по названию

Популярные бренды

Samson EB 8061 EN, Перевод оригинальной инструкции

Результаты поиска

Содержание EB 8061 EN

Отзывы:

Похожие инструкции для EB 8061 EN

Бренды по названию

Популярные бренды