Samson 5343, Монтаж и эксплуатация

Страница: 26 / 60

5-2 EB 5206 EN
Installation
5.3 Mounting the contact ther-
mostat
Single thermostats can be mounted onto
pipes with diameters between 15 and
100 mm. A strap is required in this case (see
Annex).
4. Insert seal (6) as shown in Fig. 5-3.
5. Thread the strap (8) behind the sensor
holder at the back of the housing (1).
6. Use the strap to attach the thermostat to
the pipe.
7. Unscrew the front cover of the thermo -
stat.
8. Connect the wiring as shown in sec -
tion 5.5.
9. Screw the front cover back onto the ther -
mostat.
Temperature regulators (TR):
Î
Place the set point adjuster on the shaft.
1 Thermostat
2 Sensor
6 Seal
8 Strap
6
1
8
2
Fig. 5-3: Mounting a contact thermostat
1 Thermostat
2 Sensor
3 Capillary tube
4 Set point adjuster (TR only)
5a Spring for unlocking (STL only)
6 Seal for degree of protection
IP 54
TR
1
2
3
5a
4
6
Fig. 5-2: Single thermostat · Inside view