Samson 5343, Монтаж и эксплуатация

Страница: 10 / 60

1-6 EB 5206 EN
Safety instructions and measures
1.3 Notes on possible property damage
NOTICE !
Risk of damage to the thermostat due to the supply voltage exceeding the permissi-
ble tolerances.
The Types 5343, 5344, 5345, 5347, 5348 and 5349 Thermostats are designed for
use according to regulations for low-voltage installations.
Î
Observe the permissible tolerances of the supply voltage.
Risk of thermostat damage due to incorrect mounting.
The Types 5343, 5344, 5345, 5347, 5348 and 5349 Thermostats must be mounted
properly and depending on the type of mounting.
Risk of thermostat failure due to a damaged capillary tube.
The thermostat is permanently damaged when the capillary tube of thermostat is bent or
cut.
Î
Do not bend the capillary tube.
Î
Do not cut the capillary tube.
Risk of damage to the thermostat due to turning the set point adjuster too far.
The temperature set point can be adjusted manually at the thermostat. The thermostat
will be damaged if the set point adjuster is turned beyond one of its two end stops.
Î
Do not turn the set point adjuster past its end stops.
Incorrect connection of the electrical power supply will damage the thermostat.
The thermostats have terminals that conduct electricity and are integrated into a circuit.
Î
Do not apply the voltage (L and N) to terminals 1/2 or 1/4.
Î
Observe the tolerances of the technical data.