Samson 4785, Монтаж и эксплуатация

Страница: 54 / 78

List of parameters
Actuator manufacturer
ACTUATOR_MAN
Clearly identifies the manufacturer of the actuator.
Length: 16 characters
Actuator type
ACTUATOR_TYPE
States:
Default:
Identifies the actuator design.
Read-only parameter, determined by the actuator.
0 = Electropneumatic
1 = Electric
2 = Electrohydraulic
3 = Other
0
Actuator version
ACTUATOR_VERSION (M)
States:
Default:
Actuator version with/without spring return mechanism.
0 = Single-acting with spring return mechanism
1 = Double-acting without spring return mechanism
0
Additional component
identification
ADD_GEAR_ID
Manufacturer-specific information to identify the additional component
Additional component
installation date
ADD_GEAR_INST_DATE
Installation date of the additional component
Additional component
manufacturer
ADD_GEAR_MAN
Manufacturer of the additional component
Additional component
serial number
ADD_GEAR_SER_NUM
Serial number of the additional component
Assignment AO - Transducer
Block
OUT_CHANNEL
Assignment between the output of the analog output block and the input of the
transducer block. On adjusting the default values, the OUT parameter of the AO block
is assigned to the POSITIONING_VALUE parameter of the transducer block.
Assignment Transducer - AO
block
IN_CHANNEL
Assignment between the output of the transducer block and the input of the AO block.
On adjusting the default values, the FEEDBACK_VALUE parameter of the transducer
block is assigned to the READBACK parameter of the analog output block.
Attachment
ATTACHMENT (M )
Defines the attachment of the positioner to the control valve with linear actuators.
For rotary actuators, only attachment according to VDI / VDE 3845 (NAMUR) is possible.
For more details on attachments, also see sections 2.1 and 2.2.
States:
Default:
0 = Integral — attachment in combination with a SAMSON Type 3277 Linear Actuator
1 = NAMUR — attachment according to IEC 60534-6 (NAMUR)
0
54
EB 8382-2 EN
List of parameters