manualshive.com logo in svg

Samson 3321, Монтаж и эксплуатация

Поделиться
Скачать
Samson 3321 Скачать руководство пользователя страница 39

EB 8111/8112 EN 

 39 

Servicing

7.1.2  For mounting on rods 

(Form C)

1.  Undo the body nuts (14) gradually in a 

criss-cross pattern.

2.  Lift the valve bonnet (2) and plug with 

plug stem (5) off the body (1).

3.  Remove the flat gasket (17). Carefully 

clean the sealing faces in the valve body 
(1) and on the flange bonnet (2).

4.  Insert a new gasket (17) into the body.
5.  Place the valve bonnet (2) and plug with 

plug stem (5) onto the body.

6.  Press the plug (5) firmly into the seat (4), 

while fastening down the valve bonnet 
(2) with the body nuts (14). Tighten the 
nuts gradually in a criss-cross pattern. 

Observe tightening torques.

7. 

Mount actuator. See associated actuator 
documentation.

2

8

A33

4

1

A54

5

15

17

14

1 Body
2 Valve bonnet
4

Seat

5 Plug (with plug stem)
8

Threaded bushing 

(packing nut)

13 Stud bolt
14 Body nut
15 Packing
17 Body gasket

A33 Rod
A54

Nut

Fig. 10: 

Type 3321 Valve, DN 65 to 100/NPS 2½ to 4; Form C attachment (mounting using rods)

Содержание 3321

























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды