Samson 3321, Монтаж и эксплуатация, Страница: 25 / 56

EB 8111/8112 EN 25
Measures
4.3 Storage
Risk of valve damage due to improper stor -
age.
−
Observe storage instructions.
− Avoid long storage times.
− Contact SAMSON in case of different stor -
age conditions or longer storage periods.
We recommend regularly checking the con-
trol valve and the prevailing storage condi-
tions during long storage times.
Storage instructions
−
Protect the control valve against external
influences (e.g. impact).
−
Do not damage the corrosion protection
(paint, surface coatings). Remove any
damage immediately.
− Protect the control valve against moisture
and dirt. Store it at a relative humidity of
less than 75 %. In damp spaces, prevent
condensation. If necessary, use a drying
agent or heating.
− Make sure that the ambient air is free of
acids or other corrosive media.
−
The permissible storage temperature of
standard control valves is –20 to +65 °C
(–4 to +149 °F).
Contact SAMSON's After-sales Service
department for the storage temperatures of
other valve versions.
−
Do not place any objects on the control
valve.
Special storage instructions for elastomers
Elastomer, e.g. actuator diaphragm
− To keep elastomers in shape and to pre -
vent cracking, do not bend them or hang
them up.
− We recommend a storage temperature of
15 °C (59 °F) for elastomers.
−
Store elastomers away from lubricants,
chemicals, solutions, and fuels.
SAMSON's After-sales Service department
can provide more detailed storage instruc-
tions on request.
NOTICE !
Note
Note
Tip