Samson 3241, Монтаж и эксплуатация

Страница: 9 / 64

EB 8012 EN 9
Safety instructions and measures
WARNING!
Risk of burn injuries due to hot or cold components and pipelines.
Depending on the process medium, valve components, and pipelines may get
very hot or cold and cause burn injuries.
Î
Allow components and pipelines to cool down or heat up.
Î
Wear protective clothing and gloves.
1.3 Notes on possible property damage
NOTICE
Risk of valve damage due to contamination (e.g. solid particles) in the pipe-
line.
The plant engineering company is responsible for cleaning the pipelines in the
plant.
Î
Flush the pipelines before start-up.
Î
Observe the maximum permissible pressure for valve and plant.
Risk of valve damage due to unsuitable medium properties.
The valve is designed for a process medium with defined properties.
Î
Only use the process medium specified for sizing the valve.
Risk of leakage and valve damage due to excessively high or low tightening
torques.
Observe the specified torques on tightening control valve components. Excessive-
ly tightened torques lead to parts wearing out quicker. Parts that are too loose
may cause leakage.
Î
Observe the specified tightening torques (
u
AB 0100).