Samson 3241, Монтаж и эксплуатация

Страница: 7 / 64

EB 8012 EN 7
Safety instructions and measures
Referenced standards and regulations
The control valves comply with the requirements of the European Pressure Equipment Direc-
tive 97/23/EC. Valves with a CE marking have a declaration of conformity which includes
information about the applied conformity assessment procedure. This declaration of confor-
mity is included in the Appendix of these instructions (see section 10.2).
According to the ignition risk assessment performed in accordance with EN 13463-1:2009,
section 5.2, the non-electrical control valves do not have their own potential ignition source
even in the rare incident of an operating fault. As a result, they do not fall within the scope of
Directive 94/9/EC.
Î
For connection to the equipotential bonding system, observe the requirements specified in
section 6.3 of EN 60079-14:2014-10 (VDE 0165 Part 1).
Referenced documentation
The following documents apply in addition to these mounting and operating instructions:
−
Mounting and operating instructions for mounted actuator, e.g.
u
EB 8310-X for
Type 3271 and Type 3277 Actuators
−
Mounting and operating instructions for mounted valve accessories (positioner, solenoid
valve etc.)
−
u
AB 0100 for tools and lubricant
1.1 Notes on possible severe personal injury
DANGER!
Risk of bursting in pressure equipment.
Control valves and pipelines are pressure equipment. Improper opening can lead
to valve components bursting.
Î
Before starting any work on the control valve, depressurize all plant sections
concerned and the valve.
Î
Drain the process medium from all the plant sections concerned as well as the
valve.
Î
Wear personal protective equipment.