Samson 3241, Монтаж и эксплуатация

Страница: 28 / 64

28 EB 8012 EN
Preparation
4.3 Storage
NOTICE
Risk of valve damage due to im-
proper storage.
−
Observe storage instructions.
−
Avoid long storage times.
− Contact SAMSON in case of differ -
ent storage conditions or longer
storage times.
Note:
We recommend regularly checking
the control valve and the prevailing
storage conditions during long stor-
age times.
Storage instructions
−
Protect the control valve against external
influences (e.g. impact).
−
Do not damage the corrosion protection
(paint, surface coatings). Remove any
damage immediately.
− Protect the control valve against moisture
and dirt. Store it at a relative humidity of
less than 75 %. In damp spaces, prevent
condensation. If necessary, use a drying
agent or heating.
−
Make sure that the ambient air is free of
acids or other corrosive media.
−
The permissible storage temperature of
standard control valves is –20 to +65 °C
(–4 to +149 °F).
Note:
Contact SAMSON's After‑sales Ser -
vice department for the storage tem-
peratures of other valve versions.
−
Do not place any objects on the control
valve.
Special storage instructions for elastomers
Elastomer, e.g. actuator diaphragm
− To keep elastomers in shape and to pre-
vent cracking, do not bend them or hang
them up.
− We recommend a storage temperature of
15 °C (59 °F) for elastomers.
−
Store elastomers away from lubricants,
chemicals, solutions, and fuels.
Tip:
SAMSON's After‑sales Service de -
partment can provide more detailed
storage instructions on request.

