EN
EN
8
816 809 R. 07/23
Samson Corporation • 90 Monticello Rd • N.C. 28787 Weaverville USA • Phone (828) 686-8511 • Fax (828) 686-8533 • www.samsoncorporation.
com
Problem
Cause
Solution
The gun does not dispense grease
Empty grease tube or cartridge
Refill tube or replace cartridge
Loss of prime
See “Gun priming” section
Grease point obstructed
Check installation
Dirt on non-return valve
Disassemble and clean valve
Motor doesn’t work or works at very
low speed
Discharged battery
Recharging the battery
Motor breakdown
Contact technical service
The battery does not recharge or lasts
only a short time
Charger power failure
Check charger connection
Damaged battery
Replace the battery
Damaged charger
Replace the charger
Leakage from pressure relief valve
Grease point obstructed
Check installation
Grease tube thread leakage
Seal out of place or dirty gasket
Check the seal
Damaged seal
Replace seal
SPECIFICATIONS
TROUBLESHOOTING
ENVIRONMENTAL PROTECTION
1
NLGI-2 grease is used with a back pressure of 10 bar that simulates
passage through a lubricator.
Voltage
20 V
Maximum working pressure limited
by safety valve
7250 psi (500 bar)
Flow
100 g/min (“L” mode)
160 g/min (“H” mode)
Grease type
Up to NLGI-2
1
Grease capacity
450 g (bulk)
400 g (cartridge)
Sound pressure LpA
68 dB (A), K = 3 dB (A)
Sound pressure LwA
79 dB (A), K = 5 dB (A)
The above symbol indicates that, in accordance with
local regulations, your product and/or battery should be
disposed of separately from household waste. When
this product reaches the end of its life, it must be taken
to a collection point designated by the local authorities.
The separate collection and recycling of the product or its battery at the
time of disposal will help to protect natural resources and ensure that it is
recycled in a manner that protects human health
and the environment.
Pos.
Code
Description
1
169500
120 V USA Charger
2
169020
Li-Ion 20V 2Ah Battery
3
169021
Li-Ion 20V 4Ah Battery
4
169503
Carrying case
5
710310
Tube assembly for 160500
6
710626
Tube assembly for 160510
7
169012
Outlet hose
8
121011
Nozzle
9
169014
Adapter for cartridges with Tr20 thread
10
169015
Adapter for cartridges with 1” BSP thread
SPARE PARTS
1
4
9 / 10
7
8
5 / 6
2 / 3
Vibration
a
R
< 2,5 m/s
2
, Uncertainly K = 1,5 m/s
2
Functions
Battery level, cartridge grease estimation,
grease meter estimation, unit change (g/oz),
LED light
Battery
Li-Ion 2.0/4.0 Ah
Battery charger
220V-240 VAC
Charging time
70-90 min (2 Ah)
Hose length
110 cm (43”)
Weight
3 kg / 6.6 lb (with tube and 2Ah battery)