Sampo SR1046PRO, Инструкция по эксплуатации

Страница: 55 / 101

- 55 -
SR 1046PRO
35
36
instruction manual
H
arv es t er
2/2012
the engine and disengage the brakes. Make
sure the clearance in the lower brake shoe is
approx. 1 mm. Adjustments can be made by
turning limiter B. Adjust the clearance in the
upper brake shoe using adjusting screw A.
The clearance between the brake shoe and
drum shall be the same on both sides of the
harvester to achieve even braking.
Fig. 35
A Adjusting screw
B Limiter
11. Checking of belt tension
Check the tension of belts in the water pump,
generator and optional air conditioner. The
tension is correct when there is a deflection
of 15-20 mm when pressing with your thumb.
Replace worn and damaged belts (fig. 36).
12. Cleaning of polycarbonate windows
Remove any particles that may damage the
window surface. Avoid using any sharp objects.
Use mild and environmentally friendly deter-
gents and plenty of water for washing.
Substances suitable for removing stains
include pure isopropyl alcohol, white spirit,
heptane, white gas, butyl etylene glycol,
methanol, hexane and butanol. Use plenty of
water for rinsing after the removal of stains.
NOTE! Do not use other solvent
substances such as gasoline for clean-
ing windows.
Service measures every 500 hours
1. All daily and weekly service measures.
The service measures to be taken every 500 hours include all the measures listed under
service measures daily or every 8 hours as well as the measures listed under service
measures weekly or every 50 hours and every 100 hours.