Sampo SR1046PRO, Инструкция по эксплуатации

Страница: 62 / 101

- 62 - - 63 -
SR 1046PRO
instruction manual
H
arve st er
2/2012
Lubrication
Do not lubricate while the engine is running. Remove the ignition key before starting lubricating. The
table below gives recommended lubricants to be used in different temperatures. The table also gives
different types of air conditioning liquids, although they do not normally have to be changed.
* If you want to use biodegradable hydraulic oils, consult the Manufacturer.
Initial fills
Engine:
Shell Rimula R5 E 10W-40
Gearbox: Shell Spirax HD 80W-90
Hydraulics: Shell Tellus Arctic 32
Lubrication grease: SHELL Rhodina Grease EP2
The initial installation oils are those with a temperature range of –25...+30°, except in hydrau-
lics where the oil should be Shell Tellus Arctic 32. In the first maintenance, switch to oil types
suitable for the area where the machine is used.
The guarantee is valid only when lubricants in compliance with the initial fill lubri-
cants are used!
Correct lubrication is of major importance to the perfect functioning and long working life of
the forest harvester, due to which the lubrication recommendations shall be followed carefully
while simultaneously monitoring if any place requires more lubrication.
All the lubricants shall be free from impurities. Even the slightest impurities may cause damage.
Oil fillers and nipples shall be wiped clean. Apply grease on the nipples in accordance with the
lubrication table. Apply machine or engine oil to places to be oiled.
Recommended lubricant Oil grade
API Viscosity
SAE Filling quan-
tity l Change
interval
-25…+30°C +10…+45°C
Engine
- Common Rail CI-4 10W40 10W40 12 500 h
Gearbox GL–5 80W90 85W140 3,5 1000 h
Final drives, front GL–5 80W90 85W140 right 5,3
left 5,0 1500 h
Hydraulics
1
Shell
Esso
Shell Tellus Arctic 32
Univis 32
TellusOil TX32 Tellus Arctic 32
Univis 46
TellusOil TX46 130 1500 h
Lubrication points CB/CC 10W30 15W40 – –
Grease points Lithium grease NLGI 2 NLGI 2 – –
AC oil PAG 500 SUS 500 SUS 1.8 dl initial fill –
AC oil HFC R134a – – 1.15 kg –
Crane turning motor See the crane manual 1 000 h
Chain oil See harvester head manual