INSTALLATION
- 15 -
1. Before you connect any cables, refer to the safety instructions at the beginning of this manual and make sure your
computer (or video equipment) and display are switched off.
2. Connect the video cable (AV, S-Video or RGB cable) and audio cable to your monitor.
3. Connect the AC power cord to your monitor.
4. Plug the AC power cord to a properly grounded outlet.
5. Turn on your computer or video equipment.
6. Turn on your monitor‘s power by pushing the power button. The power indicator should be illuminated.
NOTE: If the button does not function due to interference, disconnect from the main
power supply for 10 seconds. Then reconnect and turn the power on.
AC IN
RGB 1 IN
LASER DISK or VCD
or VCR
GAME PLAYER
DVD PLAYER / SET TOP BOX
PC/NOTEBOOK
R
L
AUDIO
RGB OUT
MONITOR
°
Y CB CR R
L
´
²
³
COMPONENT
AV
R
L
AV3
±
AV2 R- AUDIO- L
AV1 R- AUDIO- L
OUT R- AUDIO- L
AUDI
O
RS-232
INPUT
SELECT
DEGAUSS
－
MENU
＋
－
VOL
＋
STANDBY POWER
POWER SAVING
POWER
3
ADJUST
4
RGB-2 IN
▼
CHANNEL
▲
