CONNECTING YOUR MONITOR
- 12 -
1. AC IN:
This terminal is for AC power cord.
2. RGB 1 IN:
This terminal is for RGB analog signal, use with IBM PC and other compatibles.
3. RGB OUT:
This terminal can output RGB analog signal that your monitor is using.
(
＊
This terminal is for rear RGB in Signals )
4. RGB AUDIO IN:
These terminals are for sound signal when monitor is in RGB mode.
5. AV1 IN:
These terminals are for video and stereo sound signals, used with video equipment.
6. AV2 IN:
These terminals are for video and stereo sound signals, used with video equipment.
7. AV3 IN:
These terminals are for video and stereo sound signals, used with video equipment.
8. AV OUT:
These terminals can output video and variable audio signals that your monitor is using.
9. Y CB CR:
This terminal is for Y CB CR signal and stereo sound signals, used with Y CB CR equipment.
10. RS232 IN:
This terminal is for control system signal, for use with IBM PCs and compatibles.(page 20)
NOTE :
1. Please follow the above description when connecting your display.
2. This terminal (AV OUT) only supply the AV1 or AV2 type signal and does not supply the Y
CB CR type signal.
AC IN
RGB 1 IN
¬
-
R
L
RGB OUT
®
AUDIO
¯
µ
°
Y CB CR R
L
´
²
³
COMPONENT
AV
R
L
AV3
±
AV2 R- AUDIO- L
AV1 R- AUDIO- L
OUT R- AUDIO- L
AUDI
O
RS-232
