Sampo SME-32DL5, Руководство пользователя

Страница: 10 / 27

SPECIFICATIONS:
- 10 -
MULTIMEDIA MONITOR 34” (4:3) 29” (4:3)
1. Cathode ray tube
a. tube size 34 inch
(32 inch viewable) 29 inch
(27 inch viewable)
b. Dot pitch H=0.8mm H=0.68mm(center)
c. Light transmission 35% typical 53.5% typical
2. Power
a. Input voltage 100 Vac ~ 240 Vac
60Hz / 50Hz 100 Vac ~ 240 Vac
60Hz / 50Hz
b. Input current 3A at 110Vac / 60Hz Max 3A at 110Vac / 60Hz Max
c. Power consumption 220 Watts(Max) 210 Watts(Max)
3. Input signal
Video signal
a. Type Analog Analog
b. Polarity Positive Positive
c. Amplitude
RGB: 0.714 Vp-p
AV: 1Vp-p (with sync)
Y CB CR: 1Vp-p
(with sync)
RGB: 0.714 Vp-p
AV: 1Vp-p (with sync)
Y CB CR: 1Vp-p
(with sync)
d. Input impedance 75 ohms 75 ohms
e. Dot rate 75 MHz(Max.) 75 MHz(Max.)
Audio Signal
a. Type Analog Analog
b. Polarity 1.0Vp-p 1.0Vp-p
c. Amplitude
≧
10K
Ω ≧
10K
Ω
Horizontal sync
a. Type TTL TTL
b. Polarity Positive or negative Positive or negative
c. Input impedance 1K ohm(Min) 1K ohm(Min)
d. Frequency
RGB: 31 KHz ~ 52 KHz
AV/Y CB CR:
15.734 KHz (NTSC)
15.625 KHz (PAL)
RGB: 31 KHz ~ 52 KHz
AV/Y CB CR:
15.734 KHz (NTSC)
15.625 KHz (PAL)
Vertical sync
a. Type TTL TTL
b. Polarity Positive or negative Positive or negative
c. Input impedance 1K ohm(Min) 1K ohm(Min)
d. Frequency
RGB: 50 Hz ~ 120 Hz
AV/Y CB CR:
60 Hz (NTSC)
50 Hz (PAL)
RGB: 50 Hz ~ 120 Hz
AV/Y CB CR:
60 Hz (NTSC)
50 Hz (PAL)
4. Connector type 15 pin D-type and RCA JACK and
S-terminal 9pin D-SUB 15 pin D-type and RCA JACK and
S-terminal 9pin D-SUB
5. Horizontal size 620 +/- 8 mm
(for RGB mode 1-9) 520 +/- 6 mm
(for RGB mode 1-9)
Vertical size 465 +/- 8 mm
(for RGB mode 1-9) 388 +/- 6 mm
(for RGB mode 1-9)