FRONT PANEL AND CONNECTIONS
-17-
1.
Pressing the POWER button turns on the unit. When power is on, the
green POWER LED illuminates. When power is off, the unit switches to
standby mode illuminating the red STANDBY LED.
2.
To display the monitor’s on-screen display, press menu +/- button. The
first line of the window displays the master picture menu and the setting of
a selected feature. The last line of the window reports the current
resolution and frequency settings.
3.
The VOLUME -/+ buttons turns up the volume of your TV/monitor. These
buttons also function as the ADJ - / + buttons for setting TV/Monitor
settings.
4.
Degaussing keeps the display free from unwanted magnetism that can
result in color impurity. Each time the monitor is turned on, it is
automatically degaussed. If the unit is displayed continuously, It is
recommended that unit is degaussed at least once every few days to
remove any color impurities. Whenever the degauss button is pushed, the
display image blurs and a humming sound is heard. This is normal. The
screen will return to normal operations in a matter of seconds. A minimum
of 20 minutes should be observed between each use of the manual
degauss button.
5.
Press button to select the source of display. Each time the input button is
pressed, the on-screen display will toggle between “AV1”, “AV2”,
S-VIDEO 3, “Y/CB/CR”, “Y/PB/PR”, and “RGB”.
POWER
MENU
ADJ
DEGAUSS
INPUT
SELECT
AV1
→
AV2
→
S-VIDEO 3
→
YCBCR
→
YPBPR
→
RGB