REMOTE CONTROL FUNCTIONS
-8-
This television features “Digital Vision”, an advanced on-screen digital display and control system to adjust
various settings within the television. These functions are accessible using the remote control for the
televison’s front control panels.
1.
Pressing the POWER button turns on the unit. When power is on, the green
POWER LED illuminates. When power is off, the unit switches to standby
mode illuminating the red STANDBY LED.
2.
Press button to select the source signal to display. Each time the input button
is pressed, the on-screen display will toggle between “TV”, “AV1”, “AV2”,
S-VIDEO 3 , “Y/CB/CR”, “Y/PB/PR”, and “RGB”.
3.
Use the AIR/CABLE button to switch the tuner from receiving standard over
the air broadcasts or standard cable television broadcasts. If AIR is selected,
the TV can receive channels 2 to 69. If CABLE is selected, the TV can
receive channels 1 to 125.
4.
Use the FULL SEARCH button to automatically program the television to
receive broadcasts from all available channels. When this button is pushed
for 1.5 seconds, the TV will begin the FULL SEARCH process and memorize
all available channels. The search takes some time and you can cancel the
search by pressing the FULL SEARCH button during the search.
Note:
l
If the tuner is set to AIR (see above), the search range is from CH2 to
CH69. If the tuner is set to CABLE TV, the search range is from CH1 to
CH125.
l
The searching data for AIR TV mode and CABLE TV mode is
independent. So the FULL SEARCH function must be performed twice,
once in AIR mode and once in CABLE TV mode.
5.
Push “
▲
” and “
▼
“ to change channels. The television will automatically skip
blank channels.
POWER
INPUT
SELECT
AIR
CABLE
FULL
SEARCH
CH
s
t
