SamplexPower SSW-1000-12A, Руководство пользователя

Страница: 3 / 52

3
Section 1 | important Safety instructions
1.1 tHIS MAnUAL contAInS IMPoRtAnt InFoRMAtIon ReGARDInG SAFetY,
oPeRAtIon, MAIntenAnce AnD StoRAGe oF tHIS PRoDUct. BeFoRe USe, ReAD
AnD UnDeRStAnD ALL cAUtIonS, WARnInGS, InStRUctIonS AnD PRoDUct
LABeLS, PLUS YoUR VeHIcLe’S BAtteRY MAnUFActUReR GUIDeLIneS. FAILURe to
Do So coULD ReSULt In InJURY AnD/oR PRoPeRtY DAMAGe.
1.2 To ensure reliable service, your power inverter must be installed and used properly. Please read
the installation and operating instructions thoroughly prior to installation and use. Pay particular
attention to the WArNING and CAUTIoN statements in this manual. The CAUTIoN statements advise
against certain conditions and practices that may result in damage to your inverter. The WArNING
statements identify conditions or practices that may result in personal injury. read All Instructions
before Using This power inverter!
1.3 WARnInGS!
to ReDUce tHe RISK oF FIRe, eLectRIc SHocK, eXPLoSIon oR InJURY
1. The AC output of the unit should never be connected directly to an electrical breaker Panel
/ Load Center which is also fed from the utility power / generator. Such a direct connection
may result in parallel operation of the different power sources and AC power from the utility
/ generator will be fed back into the unit which will instantly damage the output section
of the unit and may also pose a fire and safety hazard. If an electrical breaker Panel / Load
Center is fed from this unit and this panel is also required to be fed from additional alternate
AC sources, the AC power from all the AC sources (like the utility / generator / this inverter)
should first be fed to an Automatic / Manual Selector Switch and the output of the Selector
Switch should be connected to the electrical breaker Panel / Load Center. Samlex America,
Inc. Automatic Transfer Switch Model No. STS-30 is recommended for this application.
2. Working with the unit may produce arcs or sparks. Thus, the unit should not be used in
areas where there are flammable materials or gases requiring ignition protected equipment.
These areas may include spaces containing gasoline-powered machinery, fuel tanks, battery
compartments and engine compartments.
3. In SSW-350-12A and SSW-600-12A, the Neutral terminal of the two NeMA5-12r outlets is
electrically isolated from its Ground terminal and also from the metal chassis of the inverter.
Hence, the Neutral terminal will be at elevated voltage of around 66 VAC with respect to the
Ground terminal and with respect to the metal chassis of the inverter. Do NoT ToUCH THe
NeUTrAL TerMINAL!
4. In SSW-1000-12A, SSW-1500-12A and SSW-2000-12A, the Neutral terminals of the Dual
NeMA5-20r GfCI AC outlets are bonded to their Ground terminals and also to the metal
chassis of the inverter. Hence, the Neutral terminals of the outlets will be at 0V with respect
to their Ground terminals and with respect to the metal chassis of the inverter.
5. before working on an AC load connected to the inverter, switch off the inverter or, remove
the power cord of the AC load from the inverter or from the multiple outlet power strip
connected to the inverter. Switching off the AC load or the power strip disconnects only
the "Line / Hot" line. However, the Neutral line remains connected. As indicated above, in
SSW-350-12A and SSW-600-12A, the Neutral will be at 60V with respect to Ground/chassis.
Hence, touching any section of the load connected to the Neutral will produce electrical shock!
6. Do not make any electrical connections or disconnections in areas designated as IGNITIoN
ProTeCTeD. This includes 12 VDC cigarette plug connections, and terminal connections.