3
INSTALLATION INSTRUCTIONS
8
D.
Insert the fuse MRBF into stud provided on the CFBAR. See Fig.3.7.
E.
Next insert the cable lug (crimped to the free end of the Positive cable) into the CFBAR stud
so that it sits over the fuse MRBF. See Fig. 3.8.
F.
Next insert the fl at washer, the spring washer and the M-8 nut on to the CFBAR stud and
tighten the nut with a ½” wrench. See Fig. 3.9.
Fig. 3.7. Fuse MRBF inserted into the stud on CFBAR
Fig. 3.5. M-8 Nut, Flat Washer and Spring Washer
Fig. 3.6. Insulating cap
Fig. 3.8.
