Samplex Europe SEC-1245E, Руководство пользователя

Страница: 18 / 39

INSTALLATION
LOCATION, MOUNTING AND SAFETY
The charger is required to be installed in a safe, well ventilated and dry location. Please see
the details given under “Important Safety Precautions”.
The charger can be mounted horizontally or vertically. When mounting vertically, please
ensure that the axis of the fan rotor is horizontal (to reduce stress on the bearing).
OUTPUT CONNECTORS
Connectors with tubular, screw down type of terminals are used for output connection.
The diameter of the tubular hole of the connector is 8 mm (0.31 inches).
Two positive output connectors (1, 2) are provided for connecting to the positive
terminalsof the 2 banks of batteries. One common connector (3) is provided
for the negative connection.
TERMINAL LUGS FOR CONNECTION TO THE CHARGER
For firm connection when using stranded cable, crimp / solder “pin” style terminal lugs on
the charger end of the DC cables used for connecting to the battery / other DC loads.
3 pieces of “pin” style terminal lugs have been provided as follows:
• For SEC-1245E Will accomodate up to 25 Mmq cable
• For SEC-1260E Will accomodate up to 35 Mmq cable
• For SEC-1280E Will accomodate up to 35 Mmq cable
• For SEC-2425E Will accomodate up to 10 Mmq cable
• For SEC-2440E Will accomodate up to 25 Mmq cable
CABLES
To avoid polarity errors and possible damage, never use cables of only one color. Use red
insulated cable(s) for positive connection(s) and black for negative connection(s).
Recommended DC cable sizes are given below (Based on a voltage drop of 2%). The length
in feet is the length of the pair of the positive and negative DC cables from the charger to the
battery / other DC loads.
Distance from battery
SEC-1245E SEC-1260E SEC-1280E SEC-2425E SEC-2440E
Up to 1.8Mtr 16 Mmq 25 Mmq 35 Mmq 10 Mmq 10 Mmq
1.8 - 3.0 Mtr 25 Mmq 35 Mmq 50 Mmq 16 Mmq 16 Mmq
3.0 - 6.0 Mtr 35 Mmq 70 Mmq 95 Mmq 25 Mmq 25 Mmq
Page 17