Samon ONION LOADER SU2LS, Руководство и список запасных частей

Страница: 22 / 55

H20
www.samon.nl - info@samon.nl
V1-2018-ENG
20
7. Transport and storage.
7.1 Transport on a vehicle.
•
Check the height and width of the SAMON Onion Loader and mark any projecting parts, where
applicable.
•
Make sure that the machine is fastened securely with strong rope or tensioning belts before the
transport.
•
Block the wheels with wheel blocks.
7.2 Transport behind a tractor.
•
Observe the prevailing traffic regulations when you transport the SAMON Onion Loader behind a
tractor on the public roads.
•
Make sure that the conveyor belt has been folded in before you begin to transport the SAMON Onion
Loader.
•
Make sure that the intake has been folded in before you begin to transport the SAMON Onion Loader.
•
Never switch on the sieve, hedgehog or conveyor belts while transporting the SAMON Onion Loader.
•
When you are steering the tractor bear in mind that the tail of the SAMON Onion Loader swings out in
bends.
•
The driver's view is obstructed when the tractor is towing the SAMON Onion Loader.
7.3 Storage.
•
Clean the machine thoroughly.
NOTE!!!
When using a high-pressure spray make sure that you do not direct the spray on or in bearings and any
electronics, where relevant.
•
Check the tyre pressure and inspect the tyres for damage (2,5 bar).
•
Check all wearing parts and replace any worn parts in good time.
•
Check all bearings and replace when the play is excessive.
•
Inspect the sieve, hedgehog and conveyor belts for damage and breakage.
•
Inspect all guide and vibratory rollers.
•
Inspect the feed roller for damage and breakage.
•
Inspect the complete hydraulic system for damage and leaks.
•
Inspect the complete electronic system for damage.
•
Lubricate the entire machine (see the Lubrication Section for more details).
•
Check the oil level in de gearbox and top up if necessary.
•
Check the oil level of the hydraulic system and top up if necessary.
•
Inspect all protective covers and rubbers.
•
Inspect the universal joints and the sliding parts of the PTO shaft for wear.
•
Lubricate the universal joints and the sliding parts of the PTO shaft.
•
Inspect the protective cover of the PTO shaft for cracks.
•
Check the safety chains of the PTO shaft.
•
Inspect the safety cords and locking clips for damage and cracks.
•
Store the machine when it is dry.