Samon ONION LOADER SU2LS, Руководство и список запасных частей

Страница: 21 / 55

H19
www.samon.nl - info@samon.nl
V1-2018-ENG
20
6.2 Level and temperature of the hydraulic oil.
A sight-glass and thermometer are mounted on the
side of the hydraulic oil tank.
When no oil is visible in the sight glass then top up the
hydraulic oil.
The temperature of the hydraulic oil when the
machine is in operation should be about 65 °C.
This temperature is in part determined by the ambient
temperature.
Th
e hydraulic tank is filled with “H46” hydraulic oil
when the machine leaves the factory.
NOTE!!!
The hydraulic oil must be replaced every 2 years.
6.3 Replacing the gearbox oil.
The gearbox is filled with SAE 90 gearbox oil when the machine leaves the factory.
•
Remove the venting nipple (A) on the top of the
gearbox and the plug (B) on the bottom of the
gearbox.
•
Drain the gearbox and collect the oil in a
container: make sure that the oil is processed in
an environmentally-responsible manner.
•
Fit the plug (B) in the bottom of the gearbox.
•
Fill the gearbox with 0.35 liters of SAE 90 gearbox
oil.
•
Fit the venting nipple (A).
NOTE!!!
The gearbox oil must be replaced every 2 years.