Samon ONION LOADER SU2LS, Руководство и список запасных частей

Страница: 10 / 55

H8
www.samon.nl - info@samon.nl
V1-2018-ENG
20
5.2 Adjusting the drawbar.
5.2.1 Adjusting drawbar height.
The height of the drawbar can be adjusted to the height of the
towbar of the tractor.
•
Loosen lock nut (A).
•
Adjust drawbar height with nut (B).
•
Tighten lock nut (A).
5.2.2 Adjusting tow-ring.
In order to have the tow-ring parallel to the towbar of the
tractor the tow-ring also needs to be adjusted when the height
of the drawbar is adjusted.
•
Loosen lock nuts (A) and (B) and adjust the angle of
the tow-ring.
•
Tighten lock nuts (A) and (B).
5.3 Adjusting the wheel track.
Adjusting the wheel track:
•
Lift the machine until the right wheel is
free from the ground.
•
Loosen locking bolts (A) and (B).
•
Adjust the wheel to the right track.
•
Tighten all the locking bolts. Make sure
that the locking bolts (B) fall into the
holes of the steering axle.
Check that all five the locking bolts are used.
WARNING!!!
Always use all the locking bolts. Check that the wheel is not to pulled out to far! Always observe the
prevailing traffic regulations with regard to the maximum width when the machine is being transported on
public roads.