www.larius.com
11
I
I1
I3
I2
zEus for sanitation
REV
. 01 - 05/2020 - Cod. 150125
Always check the product is compatible with the
materials composing the equipment (
pump, spray
gun, flexible hose and accessories
) with which it can
come into contact.
If the product to be used is toxic, avoid inhalation
and contact by using protection gloves, goggles
and proper face shields.
Take proper safety measures for the protection of
hearing in case of work near the plant.
Never attempt to tamper with the calibre of
instruments.
Electrical safety precautions
• Check the switch is on the “OFF” position before connecting
the cable to the mains.
• Never carry a plugged-in equipment.
• Disconnect the equipment before storing it and before perfor
-
ming any maintenance operation or replacing of accessories.
• Do not carry the equipment neither unplug it by pulling the
electric cable.
• Protect the cable from heat, oil and sharp edges.
• When the tool is used outdoors, use only an extension cable
suited for outdoor use and so marked.
• Take care when the pumping rod is moving.
Stop the machine whenever someone is within its vicinity.
• Repairs of the electrical equipment should only be carried out
by skilled personnel, otherwise considerable danger to the user
may result.
SETTING-UP
CONNECTION OF THE FLExIBLE HOSE TO THE GUN
• Connect the high pressure flexible hose (
I1
) to the pump (
I2
)
and to the gun (
I3
), ensuring to tighten the fittings (the use of
two wrenches is suggested).
NEVER
use sealants on fittings’ threads.
It is ADVISED to mount a high pressure manometer at the
pump outlet (
see on page “Accessories”
) to read the product
pressure.
• It is recommended to use the hose provided in the accessories.
NEVER
use a damaged or a repaired flexible hose.
Make sure that the electrical system is earthed
and complies with regulations.
CHECK ON POWER SUPPLY
SOLVENTS IN CLOSED PLACES.
• NEVER USE THE TOOLING IN PRESENCE OF POTENTIALLY
EXPLOSIVE GAS.
The high speed of travel of the product in the hose
can create static electricity through discharges
and sparks. It is suggested to earth the equipment.
The pump is earthed through the earth cable of
the supply.
The gun is earthed through the high pressure
flexible hose.
All the conductors near the work area must be
earthed.
Содержание Larius Zeus 110 V
Страница 7: ...www larius com 5 C A B D zeus for sanitation REV 01 05 2020 Cod 150125...
Страница 9: ...www larius com 7 6 8 9 3 10 4 zeus for sanitation REV 01 05 2020 Cod 150125...
Страница 37: ...www larius com 35 zeus for sanitation REV 01 05 2020 Cod 150125 I n t e n t i o n a l l y b l a n k p a g e...