www.larius.com
17
GIOTTO FOR SANITATION
REV. 01 - 04/2020 - Cod. 150113
O
Fig. 1O
Fig. 2O
Fig. 4O
Fig. 5O
O1
OFF
P2
0
P3
Fig. 30
O5
O4
CORRECT PROCEDURE OF DECOMPRESSION
• Insert the gun clamp (
O1
).
• Move the ON/OFF switch (
O2
) to the
OFF
position (
0
) to stop
the equipment.
• Disconnect the power supply cable (
O3
).
• Release the gun clamp (
O4
). Point the gun at the tank of the
product and press the trigger to release pressure. At the end
of the operation, insert the gun clamp.
• Open the re-circulation valve (
O5
) to release residual pressure.
If the equipment is still under pressure after
performing the operations above described be-
cause of the nozzle or the flexible hose clogged,
proceed as follows:
• Loosen very slowly the gun nozzle.
• Release the clamp.
• Point the gun at the container of the product
and press the trigger to release pressure.
• Loosen very slowly the fitting of connection
from the flexible hose to the gun.
• Clean or replace the flexible hose and the
nozzle.
Содержание LARIUS GIOTTO
Страница 30: ...I n t e n t i o n a l l y b l a n k p a g e...
