9
R. 06/18 856 827
SAMOA Industrial, S.A. · Pol. Ind. Porceyo, I-14 · Camino del Fontán, 831 · 33392 - Gijón - Spain · Tel.: +34 985 381 488 · www.samoaindustrial.com
2018_06_26-13:00
EN
USE
PRECAUTIONS
Each type of operation should be avoided/suspended in stormy
weather in place or imminent.
Pursuant to art. 29 of the Lgs. D. 81/08, the employer is
responsible to prepare appropriate risk assessment in this regard.
It is considered useful to provide in each case the following
minimum safety information:
- Each object with an elevation predominant compared with
the surrounding area has a greater chance of being struck by
lightning; so the use of the “machine” near or under the
shelter of trees, towers or pylons must be considered at risk
and, when placed above the vehicle floor, the container can
represent itself the subject of predominant elevation relative
to the surrounding area.
- Not necessarily the risk of electrocution is due to the fact that
container’s direct target of lightning. The mere proximity to
an exposed structure constitutes danger since the current of
the lightning, after hitting its target, is dispersed in the soil, so
if you are in proximity to the hit structure and you are in
contact with the ground you may come in contact with the
leakage current and be damaged.
During transport, the power line derived from vehicle
battery must be disconnected
It is absolutely forbidden to connect/disconnect the power
cables to/from vehicle battery under load
!
SAFETY INSTRUCTIONS
DO NOT USE IN PLACES WHERE THERE MAY BE THE DANGER OF THE FORMATION OF EXPLOSIVE ATMOSPHERES (EN
60079–10)
At the end of the transfer switch the electric pump off within max.2 minutes, and discharge the residual pressure acting on the gun
for a short residual delivery.
Store your gun and hose only after verifying the absence of drips.
During transport, the power line must be disconnected and the shut–off valve closed.
For transportation, fasten the tank with belts to prevent any movement on the loading platform.
Avoid contact of the battery terminals, although unconnected, with the product since it is corrosive.
In addition to those already given in several previous chapters, we remind the user the following important requirements, where non
– compliance may result in extremely serious consequences:
