3.4.
INSTALLATION
ELECTRICAL CONNECTIONS
All operations for the connection to the mains must be carried out with no voltage applied to the machine.
EARTHENING IS COMPULSORY!
The connection of the machine to the mains and the protection device at the beginning of the socket, must be performed
with the regulations in force in the Country of the user. Check that the machine frequency and the supply voltage values
(see plate applied on the rear side of the machine), correspond to the mains values.
The machine has an electric cable and a plug.
1. Prepare a plug phase + n earth, suitable for the specified kind and protected at its beginning.
2. Before put the plug in to the mains, check that the general switch of the machine is in position
O
(off).
3. Put the plug in the socket.
FIRST LIGHTING
Before using the machine in ordinary and continuously way, check the regular machine function, doing almost 10
packagings.
If any problems could happen during the first lighting, call immediately the
Sammic.
service assistance, it is dangerous
to try any kind of dismantling, reparations or setting up of the machine.
EN
-
2
0
-
