www.samlexamerica.com Toll free 1-800-561-5885
7
eventually damage the electronics that are sensitive to humidity.
Ambient temperature should be between –20°C and +50°C.
Heat sink may reach over 70
o
C, so pay special attention to air circulation for sufficient
heat dissipation. For indoor unit, please provide external ventilation.
Mounting of Soleil 2000
Place the mounting plate of Soleil 2000 with the slots on two sides bending inwards
against the designated surface of the wall and mark the holes of the screw.
Drill the holes and hammer in the wall anchors. If you are mounting the unit on wooden
wall, be sure that the wall is thick enough for penetration of the screws 1and1/2 “ depth
into it.
Place the mounting plate against the wall again with the slots bending outwards and
fasten the four screws into their respective holes until the mounting plate is firmly held
against the wall.
Fig. 2-2 Mounting plate
Mount the unit on the mounting plate. Be sure that the six hooks from the side brackets of
the unit get into their respective fixtures on the slots of the plate and settle down.
To secure the unit, fasten a screw on the hole at the left bottom hook of the unit, as in
Fig 2-3.
Hole for
screw
Hook
fixture
Slots
