background image

46  |  SAMLEX AMERICA INC.    

 

SECTION 13  |  

Warranty

3 YEAR LIMITED WARRANTY

PST-60S-48E is manufactured by Samlex America, Inc. (the “Warrantor“) is warranted to 
be free from defects in workmanship and materials under normal use and service. The 
warranty period is 3 years for the United States and Canada, and is in effect from the 
date of purchase by the user (the “Purchaser“). 

Warranty outside of the United States and Canada is limited to 6 months. For a warranty 
claim, the Purchaser should contact the place of purchase to obtain a Return Authoriza-
tion Number. 

The defective part or unit should be returned at the Purchaser’s expense to the author-
ized location. A written statement describing the nature of the defect, the date of pur-
chase, the place of purchase, and the Purchaser’s name, address and telephone number 
should also be included. 

If upon the Warrantor’s examination, the defect proves to be the result of defective 
material or workmanship, the equipment will be repaired or replaced at the Warran-
tor’s option without charge, and returned to the Purchaser at the Warrantor’s expense. 
(Contiguous US and Canada only) 

No refund of the purchase price will be granted to the Purchaser, unless the Warrantor 
is unable to remedy the defect after having a reasonable number of opportunities to do 
so. Warranty service shall be performed only by the Warrantor. Any attempt to remedy 
the defect by anyone other than the Warrantor shall render this warranty void. There 
shall be no warranty for defects or damages caused by faulty installation or hook-up, 
abuse or misuse of the equipment including exposure to excessive heat, salt or fresh 
water spray, or water immersion. 

No other express warranty is hereby given and there are no warranties which extend 
beyond those described herein. This warranty is expressly in lieu of any other expressed 
or implied warranties, including any implied warranty of merchantability, fitness for the 
ordinary purposes for which such goods are used, or fitness for a particular purpose, or 
any other obligations on the part of the Warrantor or its employees and representatives. 

There shall be no responsibility or liability whatsoever on the part of the Warrantor or 
its employees and representatives for injury to any persons, or damage to person or 
persons, or damage to property, or loss of income or profit, or any other consequential 
or resulting damage which may be claimed to have been incurred through the use or 
sale of the equipment, including any possible failure of malfunction of the equipment, 
or part thereof. The Warrantor assumes no liability for incidental or consequential dam-
ages of any kind.

Samlex America Inc. (the “Warrantor”)
www.samlexamerica.com

Содержание PST-60S-48E

















































Отзывы: