SECTION 6 |
Layout
17
Fig 6.1: Layout of SWI 3000.
Fig 6.1 (b) SWI 3000, Front - Showing compartment
with terminals for hardwiring.
Fig 6.1 (c) SWI 3000, Back.
Fig 6.1 (a) SWI 3000, Front.
17
SAMLEX AMERICA INC. | 17
SECTION 6 |
Layout
Fig. 6.1: Layout of PST-300S
Fig 6.1 (a) PST-300S, Front
Fig 6.1 (c) PST-300S, Back
Fig 6.1 (b) PST-300S, Front - Showing compartment
with terminals for hardwiring
1. Three Position Rocker Switch
• – ON - Push top end to switch ON locally
• 0 OFF – Centered to switch OFF locally
• = EXT switch - Push button end to
enable switching ON and OFF by
external switching control
2. Green LED marked “POWER”
3. Red LED marked “OVER LOAD”
4. RED LED marked “OVER TEMP”
5. Air inlet slots for cooling fan
.
6 AC Outlet
.
7 Metal strain relief clamp for AC output cable
(for hardwiring)
• Size: Trade Size:
¾”
e
v
o
C
.
8
r plate for compartment containing
L, N and G terminals for hardwiring of AC
output
.
9 Modular Jack RJ-50 (10P10C) marked
“Remote” for connecting optional wired
Remote Control Model RC-300
10. e
T
rminal Block marked “EXT Switch” with
4 terminals for ON / OFF switching using
external control signals
m
o
C
.
1
1
partment containing L, N and G
terminals for hardwiring of AC output
12.
Nut and bolt terminal (size 6x32) for
Ground “G” for hardwiring of AC output
13. e
T
rminal Block for Line “L” and Neutral
“N” terminals for hardwiring of AC output
• Terminal hole diameter: 4.15
mm
• Termina
t
e
s
l
screw siz M
:
e
3.5
14.
Black Negative (-) DC input terminal
15.
e
r
k
c
a
l
B
movable plastic cover for Negative
(-) DC input terminal
16.
Red Positive (+) DC input terminal
17.
r
d
e
R
emovable plastic cover for Positive (+)
DC input terminal
18. O
pening for air outlet from internal fan (fan
is located behind the opening)
15,17
17
19. Chassis Grounding Terminal
20. 50/60Hz Selector Switch. 50Hz is default setting.
