SECTION 1 |
Safety Instructions
3
1.1 IMPORTANT SAFETY INSTRUCTIONS AND SYMBOLS
SAVE THESE INSTRUCTIONS. This manual contains important instructions for models
SWI 3000-12 and SWI 3000-24 that shall be followed during installation, operation
and maintenance.
The following safety symbols will be used in this manual to highlight safety
and information:
WARNING!
Indicates possibility of physical harm to the user in case of non-
compliance.
CAUTION!
Indicates possibility of damage to the equipment in case of non-
!
compliance.
INFO
Indicates useful supplemental information.
i
Please read these instructions before installing or operating the unit to prevent
personal injury or damage to the unit.
1.2 SAFETY INSTRUCTIONS - GENERAL
Installation and wiring compliance
• Installation and wiring must comply with the Local and National Electrical Codes
and must be done by a certified electrician.
Preventing electrical shock
• Always connect the grounding connection on the unit to the appropriate
grounding system.
• Disassembly / repair should be carried out by qualified personnel only.
• Disconnect all AC and DC side connections before working on any circuits
associated with the unit. Turning the ON/OFF switch on the unit to OFF position
may not entirely remove dangerous voltages.
• Be careful when touching bare terminals of capacitors. Capacitors may retain high
lethal voltages even after the power has been removed. Discharge the capacitors
before working on the circuits.
