Index revision : H
5
6336
1. Regulations, Safety Regulations and Guarantee
1.1. Regulations
The “Mach-Jet” spray gun is in conformity with standard EN50050/2001. A file is open with a notified
body to obtain the standard CE test certificate (Compliance with directive 94/9/CE)
Spray gun marking and CRN 457 control module marking
:
1.2. Safety Regulations
This equipment may be dangerous if it is not used in compliance with the security regulations specified
in this manual.
• The CRN 457 electro-pneumatic control module must never be installed where there is a risk of
explosion.
• The electrostatic paint spraying equipment must only be used by qualified personnel fully informed
of rules no.° 1 to 12 as follows:
1 A warning notice written in a language understood by the operator, summarising safety regulations
nos.° 2 to ° 9, section 1.1 of this manual, must be placed in a clearly visible position close to the
powder-spraying booth.
2 Shoes intended for operator use must be anti-static and comply with the ISO 2251 publication. If
gloves are used, only anti-static gloves or gloves ensuring grounding of the operator may be worn.
3 The floor in the area in which the operator works must be anti-static (ordinary bare concrete floors
are anti-static).
4 Powder spraying must be carried out in front of a ventilated booth designed for the purpose. Start-
up of the CRN 457 must be interlocked with operation of the ventilation system.
5 Skin-contact with or inhalation of products used with this equipment may be dangerous for
personnel (cf. Safety sheets for products used).
6 All conducting structures such as floors, walls of powder-spraying booths, ceilings, barriers, parts
to be painted, powder distribution tank, etc. that are inside or near the work station
and the earth
terminal
on the electro-pneumatic control module
must be electrically connected to the ground
system protecting the electrical power supply.
7 Parts to be painted must have a resistance in relation to the ground system that is less than or
equal to 1 M
Ω
.
ISSeP04ATEX119
EEx 2 mJ
Meylan France
P/N 1524463
II 2 D
0080
MACH-JET GUN
APPROVED
according to # 800000045
For Electro. Fin. Appl. CL. II, Spray Matl.
When configured
DES02727
FM
